enLink Status-VC – LoRa Wireless Voltage / Current Sensor

enLink Status-VC measures Voltage (0-10V) or Current (0-20mA) and transmits the reading to the cloud using long range LoRa wireless where the device data can be displayed and analysed.

enLink Status-VC instantly converts any sensor or instrument with a 0-10V or 4-20mA signal into a wireless device so that the information can be easily remotely acquired.

Sensor Characteristics

enLink Status-VC connects to sensors or transducers with either a 0-10V or 4-20mA output and sends the data using long range LoRa wireless over distances of up to 16km. The high speed, 12-bit ADC provides high resolution readings for precise measurement of the sensor or transducer.

Long life battery power enables simple, quick, low cost installation for a variety of applications.

Data can be received by any LoRaWAN compliant gateway or enLink Hub to forward data to the Cloud where it can be analysed using enVision or third-party applications.

When used with enLink Hub, sensor data can be sent via long range LoRa wireless and converted to Modbus IP register values for integration with EMS/BMS, SCADA or monitoring equipment.

Battery Powered

  • Battery life 3+ years*
  • Can be installed in minutes

Easy installation & setup

  • Field selectable mode of operation, either 0..10 Volts or 0-20mA Current
  • Compact size 129mm x 67mm x 41mm
  • Available in 868MHz and 915MHz frequencies.
  • LED Signal strength indicator
  • LED Battery level indicator
  • Full configuration and monitoring via USB
  • Available with IP67 (NEMA 4X, 13) seal

Applications

Typical applications include integration of the following sensor types

  • Pressure sensor
  • pH sensors
  • Gas sensors
  • Flow sensors
  • Level sensors
  • Temperature sensors
  • Proximity sensors
  • High current measurement (CT’s)

Case Studies incorporating enLink Status-VC Sensors

Pilkington

9th August 2018